Tub-to-Shower Conversion in Southwest Washington
If the tub in your primary bath only ever collects dust, converting it to a walk-in shower is one of the highest-impact bathroom upgrades you can make. We remove the tub, rework the drain and supply lines, waterproof the new base and walls, and open the footprint into a larger, easier-to-step-into shower — while helping you keep at least one tub elsewhere in the home for resale.
- Licensed & InsuredWashington · L&I
- Free EstimatesFixed-price proposals
- 3-Year WarrantyOn our workmanship
- Full tub removal and haul-away
- Drain relocation and supply-line adjustment for a shower
- Waterproofed, sloped shower base
- Curbless or low-curb entry
- Tile or low-maintenance solid-surface walls
- Frameless glass or a clean shower opening
- Niche and bench for storage and seating
- In-wall blocking for grab bars
- Slip-resistant shower floor
- Ventilation upgrade where the existing fan is undersized
Typical Timeline
Typically 1 – 2 weeks
Get Your Free Conversion Estimate
Free in-home consultation across Southwest Washington — we respond within one business day with a fixed-price proposal.
Assessment & Plan
We confirm the plumbing can move to suit a shower, plan the new drain location and entry, and choose the wall and glass approach that fits the footprint.
Tub-Out & Plumbing
The tub comes out, we inspect the subfloor and framing, and we rework the drain and supply lines for the shower — repairing any moisture damage the old tub was hiding.
Waterproof & Build
We build and waterproof the sloped base, apply a membrane on the wet walls, and install tile or panels over a continuous barrier.
Glass & Finish
Glass, fixtures, and hardware go in, everything is sealed, and we confirm ventilation and drainage before the final walkthrough.
Plan Your Remodel With Confidence.
Tell us about your kitchen, bathroom, siding, or deck project and we'll help you plan the scope, materials, and budget that fit your home — free, no obligation, in a single conversation. Then book a consultation with our licensed Southwest Washington crew.
Free consultation · No obligation · Licensed & insured
Converting a rarely-used tub to a walk-in shower is one of the highest-impact updates in a bathroom remodel. It's more than pulling a tub — the drain and plumbing move, the wall system is waterproofed, and the footprint opens into a larger, easier-to-use space.
Keep a Tub Somewhere: Protecting Resale
The most common worry we hear is resale — and the guidance is simple: keep at least one bathtub in the home, usually in a hall or guest bath, and convert the primary-bath tub you never use. Most buyers (especially families) want a tub somewhere, so we plan which bathroom keeps one. Done that way, a conversion reads as an upgrade, not a limitation.
Plumbing, Waterproofing & the Drain
A tub drain sits in a different spot than a shower drain, so we relocate the drain and adjust the valve and supply lines. Then the real work: a bonded waterproofing membrane on the wet walls and a sloped, sealed base — built to the tile industry's ANSI A118.10 waterproofing standard — so the new shower keeps water off the framing for the long haul. Pulling the old tub is also when we find and repair any hidden subfloor rot.
A Natural Time to Add Accessibility
- Curbless or low-curb entry that's far easier to step into.
- In-wall blocking for grab bars, added during the build.
- A built-in bench or fold-down seat.
- Slip-resistant floor tile and a hand-held shower.
Because the CDC reports more than 1 in 4 adults 65+ fall each year — often getting in and out of a tub — a conversion is a natural moment to build in safety. See our accessible & aging-in-place bathrooms page, or the full walk-in shower build.
Talk to a real project manager
Have Questions? Call Now for a Free In-Home Consultation.
Mon–Fri 7 AM–6 PM · Licensed & insured · No obligation
George S · Your Project Manager
Will converting my tub to a shower hurt resale value?
Usually not, as long as the home keeps at least one bathtub — most buyers and appraisers want a tub somewhere in the house, typically in a hall or guest bath. Converting a rarely-used primary-bath tub to a walk-in shower is a popular, high-appeal upgrade. We help you plan which bathroom keeps a tub so the conversion adds value rather than limiting your buyer pool.
Does the plumbing have to move?
Some of it, yes. A tub drain sits in a different spot than a shower drain, so we relocate the drain and adjust the valve and supply lines for a shower. That work is straightforward when there's crawlspace access below; on a slab foundation or in tight framing it takes more planning, which we confirm during the assessment.
How long does a tub-to-shower conversion take?
A typical conversion runs about one to two weeks, depending on the plumbing changes, the wall finish you choose, and any subfloor repair uncovered when the tub comes out. You get a written schedule after the assessment.
Can the new shower be curbless or accessible?
Yes. A conversion is a natural time to go curbless and add grab-bar blocking, comfort-height fixtures, and a bench — see our accessible and aging-in-place bathrooms page for how we build for safety and independence.
Is a tub-to-shower conversion a good rainy-season project?
Yes. It's fully interior work, so unlike siding or a deck it isn't weather-dependent — we run conversions year-round. The wet winter months, when exterior projects slow down, are a great time to schedule one.
We convert tubs to walk-in showers for homeowners across Vancouver, the Camas-Washougal Gorge, North Clark County, and the Lewis River and Cowlitz corridor. Each community has its own dedicated page with local permitting and project detail — and each regional hub covers the surrounding areas we also serve.
The following government agencies, industry organizations, and official resources provide additional information relevant to your remodeling project.
Ready to Start Your Remodeling Project?
Get a free, no-obligation estimate from Southwest Washington's remodeling and exterior specialists. Licensed, insured, and ready to build.