Decks & Patios in Felida, WA
Custom decks and patios built for Pacific Northwest living.
Felida is one of the Vancouver-metro communities in Clark County that we serve across Southwest Washington. When it comes to decks & patios, the details that matter here are specific to Felida homes.
Felida sits at roughly 174 feet, on the Clark County plain, in the same wet marine climate as the rest of the Vancouver metro area. PRISM's 1991-2020 climate normals put it at about 40.6 inches of precipitation a year — spread across about 103 measurable-rain days a year at VANCOUVER 4 NNE, 4.5 miles away. For decks & patios, longevity comes down to drainage and airflow — framing that sheds water instead of trapping it at joist tops and ledger connections, fasteners and flashing rated for constant wet, and enough clearance underneath for the structure to dry. Across Felida that spans early-1900s Craftsman homes near the core and much newer east-side construction, so decks & patios is specified to the assembly actually in front of us, under the Washington State Energy Code.
This page covers decks & patios specifically for Felida. For the full service details, see our Decks & Patios page, or explore all the remodeling work we do in Felida.
Felida, like neighboring Ridgefield, is a predominantly newer community — most of its housing was built from the 1990s through the 2010s in master-planned subdivisions near Salmon Creek Regional Park, with open floor plans and builder-grade finishes. Because Felida is unincorporated, permits are issued by Clark County, and most of our work here is upgrading builder-grade kitchens and baths to better finishes, along with room additions as families grow into their homes.
From Felida and Salmon Creek Regional Park area to the rest of Felida, we match every decks & patios project to the age, construction, and condition of your specific home rather than a one-size-fits-all spec.
- County
- Clark County
- Permitting authority
- Clark County — Community Development (Felida is unincorporated)
- Elevation
- 174 ftCopernicus DEM GLO-90 at the city center
- Annual precipitation
- 40.6 inPRISM 1991-2020 normals, 800 m grid at the city center
- Measurable-rain days
- 103 days/yrDays with at least 0.10 in — NOAA 1991-2020, VANCOUVER 4 NNE, 4.5 mi
- Climate zone
- Marine 4CWashington State Energy Code climate zone
- Composite decking (Trex, TimberTech, and similar)
- Pressure-treated and cedar wood decks
- Rot-resistant framing and structural connectors
- Paver patios with proper base, drainage, and edging
- Stamped and stained concrete patios
- Footings and piers engineered for sloped and drainage-sensitive lots
- Multi-level and hillside decks with stairs and landings
- Cable, aluminum, and glass railing systems rated for Gorge-corridor wind
- Built-in seating, planters, and lighting
- Prep for pergolas, fire features, and outdoor kitchens
- 01
Site Assessment & Design
We evaluate your yard's grade, drainage, soil, and wind exposure — all of which matter on the sloped lots common across our service area — and design a deck or patio with material options and a fixed-scope estimate.
- 02
Permit & Layout
We prepare drawings and pull permits where required. Elevated and attached decks generally need a permit, engineered connections, and inspections; we handle that for your jurisdiction.
- 03
Foundation & Structure
Deck footings and piers are engineered and set for your soil, slope, and drainage, with properly flashed connections tying the structure back to the home. Patio bases are excavated, graded, and compacted before the surface goes down.
- 04
Surface & Finishing
Decking, pavers, or concrete are installed, followed by railings, stairs, and lighting. We complete a final inspection and share care guidance.
Typical timeline: Typically 1 – 4 weeks. We provide a written schedule after assessing your Felida home.
Permit requirements for decks & patios in Felida are handled through Clark County — Community Development (Felida is unincorporated). Because Washington building rules — including the Washington State Energy Code and local amendments — vary from one jurisdiction to the next, we confirm what your specific address requires and pull the permits and schedule the inspections the scope calls for.
- Building permits are required for structural, electrical, plumbing, and mechanical work and are issued by Clark County, not a city
- New construction and most remodels must meet the Washington State Energy Code (WSEC)
- Accessory dwelling units are governed by Washington's statewide ADU law (HB 1337) and county standards — we prepare and submit all applications
Get Your Free Decks & Patios Estimate in Felida
Free, no-obligation in-home consultation across Clark County — we respond within one business day with a fixed-price proposal.
How are deck footings handled on a sloped lot?
Sloped and drainage-sensitive lots — common on hillside sites like Camas's Prune Hill — call for engineered footings or piers sized to the soil and slope, with the deck tied back to the home using properly flashed, corrosion-resistant connections. We build to your jurisdiction's engineered design and have it inspected before framing so the structure stays put and stays dry.
Composite or wood for a Southwest Washington deck?
Composite handles our long, wet season with less upkeep — it won't rot or need annual staining, though it costs more up front. Cedar is beautiful and regionally traditional but needs regular sealing to hold up through our rainy winters. We help you weigh cost, look, and maintenance for your project.
Do decks near the Gorge need special engineering?
Often, yes. Homes in Camas, Washougal, and Skamania County see stronger, more consistent wind funneling up the Columbia River Gorge, and we specify railing systems and fastening schedules rated for that exposure rather than treating every site the same.
Do I need a permit for a deck?
Most attached or elevated decks require a permit, engineering, and inspections, and requirements vary by city and county. Ground-level patios often don't, unless they affect drainage or setbacks. We confirm and handle permitting for your address.
Do I need a permit for decks & patios in Felida?
It depends on the scope. Clark County — Community Development (Felida is unincorporated) sets the requirements for Felida, and they can differ from neighboring Washington jurisdictions. We confirm what your project needs before we start and handle the permit and inspection process as part of the job.
Do you handle decks & patios on both older and newer Felida homes?
Yes. From Felida and Salmon Creek Regional Park area to the rest of Felida, Felida in Clark County spans a range of housing eras and construction types, and we tailor the decks & patios plan to the age and condition of your specific home rather than a one-size-fits-all template.
How does Felida's weather affect decks & patios?
Felida averages about 40.6 inches of precipitation a year in PRISM's 1991-2020 climate normals. NOAA's station at VANCOUVER 4 NNE, 4.5 miles away, records about 103 measurable-rain days a year over the same 1991-2020 period. That is the constraint every detail on a decks & patios project has to answer to: assemblies need a drainage path and the ability to dry, and exterior stages get scheduled around the weather rather than against it. We plan the sequence so nothing is left open to the rain.
What should Felida homeowners know before starting decks & patios?
Two things specific to Felida. First, permits run through Clark County — Community Development (Felida is unincorporated), whose requirements differ from neighboring Washington jurisdictions — we confirm what your address needs before work starts. Second, Felida sits at roughly 174 feet, and local drainage and exposure vary enough street to street that we assess your specific lot rather than assuming. Both feed into the written scope and schedule you get before we start.
Ready to Start Your Remodeling Project?
Get a free, no-obligation estimate from Southwest Washington's remodeling and exterior specialists. Licensed, insured, and ready to build.